VIP Fumed Silica Insulated Panels Wall Facade Insulation Material

• Customization: Available
• Material: Foil+Fumed Silica Core+Foil
• Reflectivity: 95-99%
• Model NO.: QY3BV-FL
• MOQ: 500sqm
• Grammage: 160-180GSM
• Density: 160-180kg/M³
• Thickness: 5-50mm
• Thermal Conductivity: 0.0035, 25ºC
• Application: Building
• Color: Silver
• Warranty: Generally More Than 20 Years
• Refractoriness: -70- 80 ºC
• Diameter: 400X600mm
• Surface Treatment: Foil
• Usage: Buiding/Refrigerator
• Transport Package: Pallet/Carton
• Specification: 400*600mm
• Trademark: QIYAO
• Origin: China
• HS Code: 70199090
• Production Capacity: 15000 Square Meter/Square Meters Per Day

Product Description

  VIP Fumed Silica Insulated Panels Wall Facade Insulation Material

The vacuum insulation panel (VIP) is designed and manufactured in our own factory, which can meet the highest thermal protection standard of your product even under extreme environmental conditions.
VIP is a kind of thermal insulation panel, and its thermal insulation performance is ten times higher than that of traditional thermal insulation materials. VIP is a vacuum airtight heat insulation panel with excellent heat insulation performance. The core material is composed of compressed powder board of fumed silica, which is flame retardant. It is sealed with a gas tight film under vacuum. By forming a vacuum, gas conduction is eliminated.

Product Description

Specification
Structure:	Foil+Fumed Silica Core+Foil
Density	380 kg/m³
Size:	400x600 or customized
Thickness:	5-50mm or customized
Thermal Conductivity:	< 0.0035,25ºC GB/T 37608-2019
Puncture strength	19 N GB/T 37608-2019
Surface water absorption	80 GSM
Compression strength	214 KPA
Package:	Woven Fabric Bag/Carton
Size Tolerance for Length&Width	±5mm
Certificates	ROHS,MSDS,REACH
MOQ	500 m2
Features
• Excellent thermal efficiency: VIPs provide an insulating performance that has a significant improvement over other commonly available insulation materials. Because they rely on the insulation property of a vacuum they can easily achieve low U-values with minimum thickness. • Ideal for upgrading insulation during refurbishment. When upgrading, thermal performance in an existing building, it can often be hard to fit more insulation without adding to construction thickness, which might reduce the amount of daylight into the building or extending the eaves but with VIPs this can be overcome due to the thin nature of the insulation. • Reliable long term performance over life time of building. • Fits in tight spaces for new builds. VIPs are the perfect solution in areas where lack of construction space or thickness is an issue, for example, better insulation can be achieved on a floor without the need to raise skirting boards or radiators and without changing the floor level; excavating the floor or adding in a step at a doorway when adding in a new extension or balcony. • Sleek design. Having to incorporate large amounts of space for insulation can often compromise the look and feel of a building, but with VIPs, the same levels of insulation can be achieved with much thinner insulation. Difficult areas, such as dormer windows or balconies which may have gone uninsulated because of lack of space available, can be insulated without having to alter the design of the building.

 

Detailed Photos

Typical Lambda values for insulation types:

Fibreglass - 040 W/mK EPS - 038 W/mK PIR - 022 W/mK VIP - 006 W/mK (core only) This huge decrease in Lambda value means that a much smaller depth of insulation can achieve the necessary U-values.

Certifications

Application

 

Manufacturing Technique

Package

Company Profile

FAQ

 

Frequently Asked Questions

 

Q:How a vacuum slows down heat transfer?
A:There are three modes of heat transfer: conduction, convection, and radiation, and if we remove most of the air molecules from a space-as occurs when we draw a vacuum-we largely eliminate the first two of those heat transfer mechanisms. Conduction is the flow of heat from molecule to molecule. It's the reason a cast iron skillet handle heats up, but thermal conduction also occurs across a layer of air, as kinetic is transferred from one air molecule to the one next to it. If we remove most of those air molecules by creating a vacuum, there will far less conductive heat flow. Convection is the transfer of heat by moving molecules from one place to another. Warm air rises, and these convection currents carry heat-for example, this is the primary means that heat is delivered to a room from baseboard convectors (often called radiators). In a vacuum there are far fewer air molecules so convection of heat nearly stops.
Q:Is it possible to work with vacuum insulation panels the same way as with conventional insulation materials?
A:The high barrier film around the vacuum panel should not be damaged. If the plastic film is punctured and air flows in, the thermal conductivity rises up to 0.020 W/mK. Therefore it is not possible to cut vacuum panels to the appropriate size on site. Equally it is not possible to puncture them with dowels or similar items. Beside these limitations, vacuum panels can be glued to other surfaces or integrated into different constructions with appropriate covers.

Q:Is it possible to make curved vacuum insulation panels?

A:In general, thin vacuum panels can be bent into cylindrical forms within some limitations. The thinner the panel, the smaller the possible curvature radii. Regular vacuum panels cannot be formed into complex forms with two-dimensional curvatures like spherical parts or similarily complicated shapes. However, new technologies allow us to produce more complex shapes, even panels with holes. Please contact us for details if you have special requirements.

Q:Up to what temperatures can vacuum panels be used?
A:The microporous filling can sustain temperatures of up to 900 °C without damage. The outer plastic barrier film, however, can tolerate temperatures up to 80°C, but at permanently applied temperatures above about 40°C to 50°C significantly more air gases and water vapor passes through than at room temperature. This limits the duration of the application.

Q:Are vacuum panels sensitive to humidity?
A:Short term exposures of high humidity don't cause any problems to the used films of the vacuum panels. However they should not be exposed to high humidity for longer periods of time, especially in combination with high temperatures. Therefore, it is advisable to install humidity barriers in such a way that the vacuum insulation panels are kept dry.

Q: Why should we choose the Qiyao brand over the competition?

A: Our core competence is our ability to source quality products from top-notch factories around the world. We are very meticulous in the process of filtering out suppliers who have the ability to deliver quality products at cost effective pricing, and also most importantly we only deal with those suppliers who have utmost integrity and professionalism. With Qiyao you get better quality materials comparable to big named brands at the right price
Q: How about quality control?

A: We have stable workers and engineers to make sure our quality is stable for years. Our purchase department will check the raw materials, our engineers will test the machines and the first few quantities before mass production, our QC will check the quality in production for thickness, length, width, weight…

Q:What's the regular package?
A: Flexible packing according to the specific requirements of the clients.

PE bag plastic packaging (roll / bag) / woven bag packaging(roll / bag)--pallet packaging PE bag plastic packaging (roll / bag) / woven bag packaging(roll / bag)--Bulk

Q:DO YOU HAVE A minimum QTY?
A:Our MOQ is 500sqm.

Q:Delivery time delay?
A: If the goods are in stock, it usually takes 5-10 days. If the goods are not in stock, it will take 15-20 days, depending on
the quantity. Usually within 30 days.
Q:Can I order a small qty or less container to start ?
A:It's welcome for any quantity, we support small clients growing. If you are an end user, it would save you money because we are factory direct selling. But if you are buying these products for resell or wholesale, as these products are large-volume items, we suggest you container load to save your shipping cost and make you more competitive.

ANY OTHER QUESTIONS, PLEASE FEEL FREE TO CONTACT US!